MS24587E
REQUIREMENTS:
Dimensions and configurations: The design, construction, and physical dimensions shall be in accordance with MIL-DTL-5070 and figure 1 in case of conflict between this drawing and
MIL-DTL-5070, this drawing shall govern.
Intended use: This assembly is designed for use only with hose in accordance with MIL-DTL-8794. Materials: Materials shall be in accordance with MIL-DTL-5070.
Finish: Finish shall be in accordance with MIL-DTL-5070.
Color identification: Color identification shall be accordance with MIL-DTL-5070. PIN example:
MS 24587 -3 CZ
Code for material/finish (see table I) Dash number on figure 1
Basic specification number
MS prefix
TABLE I. Code for material and finish.
Code |
Dash size |
Material/finish |
CC |
-3 thru -6 |
Carbon Steel - cadmium plating |
CZ |
-3 thru -6 |
Carbon steel - zinc plating |
SS |
-3 through -6 |
Corrosion resistant steel - N/A |
AA |
-8 through -32 |
Aluminum - anodic coating |
TA |
-3 through -32 |
Titanium - Anodized or fluoride phosphated. |
To the users of this document, it is recommended that the use of carbon steel material with cadmium plating be used only when the other materials and finishes specified in this document cannot meet performance requirements.
Identification of product. The PIN and the manufacturer's Commercial and Government Entity
(CAGE) Code or trademark shall be marked on a removable tag securely attached to the assembly.
Changes from previous issue. Marginal notations are not used in this revision to identify changes with respect to the previous issue, due to the extent of the changes.
Referenced documents. In addition to MIL-DTL-5070, this document references the following:
AN818
MS24588
MS24589
MS24590
MS24591
MIL-DTL-8794
3
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business