MS22064C
MS22064 Dash number |
Hose OD inch (mm) |
H Max height inch (mm) |
L Tooth length inch (mm) |
T Thickness inch (mm) |
Number of teeth |
|
Min |
Max |
|||||
-1 |
.469 (11.91) |
.500 (12.70) |
.093 (2.36) |
1.000 (25.40) |
.017 (0.43) |
8 |
-2 |
.563 (14.30) |
.625 (17.15) |
||||
-3 |
.688 (17.48) |
.750 (19.05) |
||||
-4 |
.813 (20.65) |
.875 (22.23) |
.020 (0.51) |
|||
-5 |
.938 (23.83) |
1.250 (31.75) |
1.719 (43.66) |
.022 (0.56) |
14 |
|
NOTES:
1. Dimensions are in inches.
2. Metric equivalents are given for information only.
3. Unless otherwise specified, tolerances ± .010 (0.25 mm).
4. Dimensioning and tolerancing in accordance with ASME Y14.5.
FIGURE 1. Hose clamp dimensions and configuration - Continued.
REQUIREMENTS:
The third pair of teeth shall be the minimum engagement for use of the clamp. Materials:
Steel alloy 1070 in accordance with ASTM-A684/A684M, sheet and strip, untempered. Heat treat to HRC 40-48.
Finish: Phosphate coating in accordance with TT-C-490, type I, followed by a chemical finish, see table I.
TABLE I. Chemical finish and finish designator.
Finish designator |
Requirements |
Blank |
Zinc chromate coating in accordance with TT-P-1757, class C, color T in accordance with FED-STD-595/34151 |
P |
Zinc phosphate in accordance with MIL-DTL-16232, type Z, class 4, in accordance with FED-STD-595/34151 |
For new design it is recommended that zinc phosphate coating be specified when zinc chromate is not required.
2
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business