MS21960D
TABLE I. Dimensions. 1/ 2/ 3/
Low flow sizes |
|||||||||
Low flow size |
Tube OD Inches (mm) |
Thread T SAE AS8879 |
A Inches (mm) |
B Inches (mm) |
c ± .031 Inches (mm) |
D ± .031 Inches (mm) |
J Inches (mm) |
K Inches (mm) |
|
Al Alloy 7075 |
Al Alloy 2014/2024 |
||||||||
W4L |
-4L |
.250 (6.35) |
.4375-20UNJF-3B |
.312 (7.93) |
.500 (12.7) |
.688 (17.48) |
.406 (10.31) |
.625 (15.88) |
1.062 (26.98) |
W5L |
-5L |
.312 (7.93) |
.500-20UNJF-3B |
.344 (8.74) |
.500 (12.7) |
.750 (19.05) |
.438 (11.13) |
.625 (15.88) |
1.094 (27.79) |
W6L |
-6L |
.375 (9.53) |
.5625-18UNJF-3B |
.344 (8.74) |
.500 (12.7) |
.812 (20.63) |
.469 (11.91) |
.625 (15.88) |
1.125 (28.58) |
TABLE I. Dimensions - continued. 1/ 2/ 3/
High flow sizes |
|||||||||
High flow size |
Tube OD Inches (mm) |
Thread T SAE AS8879 |
A Inches (mm) |
B Inches (mm) |
c ± .031 Inches (mm) |
D ± .031 Inches (mm) |
J Inches (mm) |
K Inches (mm) |
|
Al Alloy 7075 |
Al Alloy 2014/2024 |
||||||||
W4H |
-4H |
.250 (6.35) |
.4375-UNJF-3B |
.312 (7.93) |
.594 (15.09) |
.688 (17.48) |
.297 (7.54) |
.625 (15.88) |
1.219 (30.96) |
W5H |
-5H |
.312 (7.93) |
.500-UNJF-3B |
.375 (9.53) |
.594 (15.09) |
.750 (19.05) |
.312 (7.93) |
.625 (15.88) |
1.250 (31.75) |
W6H |
-6H |
.375 (9.53) |
.5625-UNJF-3B |
.406 (10.31) |
.594 (15.09) |
.812 (20.63) |
.375 (9.53) |
.625 (15.88) |
1.312 (33.33) |
W8H |
-8H |
.500 (12.7) |
.750-UNJF-3B |
.422 (10.72) |
.594 (15.09) |
1.125 (28.58) |
.625 (15.88) |
.750 (19.05) |
1.500 (38.1) |
1/ Aluminum alloy 2014 and 2024 parts are cancelled. Use Aluminum alloy 7075 parts for new design.
cancelled parts may be used till stock is exhausted.
2/ Dimensions are in inches.
3/ Metric equivalents are given for information only.
2
Source: https://assist.dla.mil -- Downloaded:
Check the source to verify that this is the current version before use.
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business