MS20759C
Part or Identifying Number (PIN): The PIN consists of prefix "MS" the specification sheet number, and a dash, letter for material/finish and number for size code. Unassigned PIN's shall not be used.
MS 20759 - D 12
Size code number (see figure1)
Material/finish code letter (see table II)
Dash
Specification sheet number
MS prefix
PIN example: MS20759-D12 indicates a flange to hose adapter .750 inch (19.05 mm) hose ID to a
1.250 inch (31.75 mm) flange.
Marking: Part shall be permanently marked with the MS PIN, and include the manufacturers CAGE, name, or trademark.
Referenced documents shall be of the issue in effect on date of invitation for bid. Reference design standard MS33786 for installation.
Changes from previous issues. Marginal notations are not used in this revision to identify changes with respect to the previous issue due to the extent of the changes.
Referenced documents. This document references the following:
MIL-A-8625
MIL-DTL-5541
MS33786
ASME B46.1
ASTM B108/B108M SAE-AMS-QQ-A-225/6
SAE-AS4875
SAE-AS5132
CONCLUDING MATERIAL
Custodians: Preparing activity: Army - AV DLA - CC
Navy - AS
Air Force - 99 (Project 4730-2012-079) DLA - CC
Review activities: Army - MI
Navy - MC, SA Air Force - 71
NOTE: The activities listed above were interested in this document as of the date of this document. Since organizations and responsibilities can change, you should verify the currency of the information above using the ASSIST Online database at https://assist.dla.mil.
5
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business