MS16051G
6. Part or Identification Number (PIN): The PIN consists of the letter MS, the specification sheet number, and a dash number of coupling.
MS 16051 -2
Dash number coupling
Specification sheet number
Prefix
PIN example:
MS16051-2 indicates 8 inches aluminum aircraft ground cooling coupling assembly with
-2 body dimensions designed in accordance with figure 2.
7. Marking: Marking shall consist of the complete standard part number and manufacturer's name, Trademark, or Cage Code and shall be impression stamped or laser etched and shall be protected from corrosion.
NOTES:
1. Break all sharp edges and remove all burrs.
2. Unless otherwise specified, dimensions are in inches. Tolerances: decimals +.010; angles +1o.
3. In the event of conflict between the text of this specification sheet and the references cited herein, the text of this specification sheet shall take precedence.
4. Referenced documents shall be in effect on the date of invitation for bids.
5. Body may be designed in two pieces at the option of the manufacturer (see figure 2). If the two pieces are welded as an assembly, a non-destructed test (NDT) should be done on the weld before anodize.
6. Certain provision of this document is the subject of International Standardization Agreements NATO STANAG 3917. When change notice, revision, or cancellation of this document is proposed which will effect or violate the International Standardization Agreement concerned, the preparing activity shall take appropriate reconciliation action through International Standardization channels including departmental standardization office if required.
Document source information:
(Copies of military documents are available online at http://quicksearch.dla.mil).
6
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business