MS14315C
REQUIREMENTS
Material. 8rass or bronze in accordance with ASME 816.15. Finish. None.
Marking in accordance with ASME 816.15. Part or Identifying Number (PIN):
MS 14315 -3 X L
Thread designator:
8lank right hand thread, L- left hand thread
Outside head, inside head, face designator, see figure 1
Dash number on figure 1
8asic specification number
MS prefix
PIN examples:
MS14315-24X represents a 2 NPS X 1 NPS outside head bushing. (NPS - Nominal pipe sizes) MS14315-35ZL represents a 4 NPS X 3 NPS face bushing, left hand threads.
Legacy information:
Class 125 was changed to 250 to harmonize with ASME 816.15.
Corrected -4 and -5, both were calling out 1/2 X 3/8. Changed -4 to callout 1/2 X3/8 and -5 to
1/2 X 1/4
Changes from previous issue. Marginal notations are not used in this revision to identify changes with respect to the previous issue, due to the extent of the changes.
Referenced documents. In addition to WW-P-460, this document references ASME 816.15.
3
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business