MS14309D
Dash number to pipe size.
Dash number |
Pipe size |
mm |
- 29 - 30 - 31 - 32 - 33 - 34 - 35 - 36 - 37 - 38 - 39 - 40 - 41 - 42 - 43 - 44 - 45 - 46 - 47 - 48 - 49 - 50 - 51 - 52 - 53 - 54 - 55 - 56 |
1-1/4 x 1 x 3/4 (1.250 x 1.000 x .750) 1-1/4 x 3/4 x 1-1/4 (1.250 x .750 x 1.250) 1-1/4 x 1/2 x 1-1/4 (1.250 x .500 x 1.250) 1 x 1 x 1-1/4 (1.000 x 1.000 x 1.250) 1-1/2 x 1-1/2 x 1-1/4 (1.500 x 1.500 x 1.250) 1-1/2 x 1-1/2 x 1 (1.500 x 1.500 x 1.000) 1-1/2 x 1-1/2 x 3/4 (1.500 x 1.500 x .750) 1-1/2 x 1-1/2 x 1/2 (1.500 x 1.500 x .500) 1-1/2 x 1-1/4 x 1-1/2 (1.500 x 1.250 x 1.500) 1-1/2 x 1-1/4 x 1-1/ 4 (1.500 x 1.250 x 1.250) 1-1/2 x 1-1/4 x 1 (1.500 x 1.250 x 1.000) 1-1/2 x 3/4 x 1-1/2 (1.500 x .750 x 1.500) 1-1/4 x 1-1/4 x 1-1/2 (1.250 x 1.250 x 1.500) 1 x 1 x 1-1/2 (1.000 x 1.000 x 1.500) 2 x 2 x 1-1/2 (2.000 x 2.000 x 1.500) 2 x 2 x 1-1/4 (2.000 x 2.000 x 1.250) 2 x 2 x 1 (2.000 x 2.000 x 1.000) 2 x 2 x 3/4 (2.000 x 2.000 x .750) 2 x 1-1/2 x 2 (2.000 x 1.500 x 2.000) 2 x 1-1/2 x 1-1/2 (2.000 x 1.500 x 1.500) 1-1/2 x 1-1/2 x 2 (1.500 x 1.500 x 2.000) 2-1/2 x 2-1/2 x 2 (2.500 x 2.500 x 2.000) 2-1/2 x 2 x 2 (2.500 x 2.000 x 2.000) 2 x 2 x 2-1/2 (2.000 x 2.000 x 2.500) 3 x 3 x 2-1/2 (3.000 x 3.000 x 2.500) 3 x 3 x 2 (3.000 x 3.000 x 2.000) 4 x 4 x 3 (4.000 x 4.000 x 3.000) 4 x 4 x 2 (4.000 x 4.000 x 2.000) |
31.75 x 25.40 x 19.05 31.75 x 19.05 x 31.75 31.75 x 12.70 x 31.75 25.40 x 25.40 x 31.75 38.10 x 38.10 x 31.75 38.10 x 38.10 x 25.40 38.10 x 38.10 x 19.05 38.10 x 38.10 x 12.70 38.10 x 31.75 x 38.10 38.10 x 31.75 x 31.75 38.10 x 31.75 x 25.40 38.10 x 19.05 x 38.10 31.75 x 31.75 x 38.10 25.40 x 25.40 x 38.10 50.80 x 50.80 x 38.10 50.80 x 50.80 x 31.75 50.80 x 50.80 x 25.40 50.80 x 50.80 x 19.05 50.80 x 38.10 x 50.80 50.80 x 38.10 x 38.10 38.10 x 38.10 x 50.80 63.50 x 63.50 x 50.80 63.50 x 50.80 x 50.80 50.80 x 50.80 x 63.50 76.20 x 76.20 x 63.50 76.20 x 76.20 x 50.80 101.60 x 101.60 x 76.20 101.60 x 101.60 x 50.80 |
NOTES:
1. Metric equivalents are given for information only.
2. Material: 8rass or bronze in accordance with ASME-816.15.
3. Protective Coating: None
4. Dimensions: In accordance with ASME-816.15, table titled "Dimensions of Tees (Reducing Sizes) - Class
125".
5. Thread: As specified in ASME-816.15.
6. Marking: In accordance with ASME-816.15.
7. Part or Identifying Number (PIN): The MS PIN consists of the MS number, the dash number, and the fitting
Identification letter(s). When left-hand threads are required, add the letter "L" to the PIN.
FIGURE 1. Reducing tee fitting - Continued.
3
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business