MS14308C
Dash number to pipe size.
Dash number |
Pipe size |
mm |
- 1 - 2 - 3 - 4 - 5 - 6 - 7 - 8 - 9 - 10 - 11 - 12 - 13 - 14 |
1/4 x 1/8 (.250 x .125) 3/ 8 x 1/4 (.375 x .250) 1/2 x 3/8 (.500 x 375) 3/4 x 1/2 (.750 x .500) 1 x 3/4 (1.000 x .750) 1 x 1/2 (1.000 x .500) 1-1/4 x 1 (1.250 x 1.000) 1-1/4 x 3/4 (1.250 x .750) 1-1/2 x 1-1/4 (1.500 x 1.250) 1-1/2 x 1 (1.500 x 1.000) 2 x 1-1/2 (2.000 x 1.500) 2-1/2 x 2 (2.500 x 2.000) 3 x 2-1/2 (3.000 x 2.500) 4 x 3 (4.000 x 3.000) |
6.35 x 3.18 9.53 x 6.35 12.70 x 9.53 19.05 x 12.70 25.40 x 19.05 25.40 x 12.70 31.75 x 25.40 31.75 x 19.05 38.10 x 31.75 38.10 x 25.40 50.80 x 38.10 63.50 x 50.80 76.20 x 63.50 101.60 x 76.20 |
NOTES:
1. Dimensions are in inches.
2. Metric equivalents are given for information only.
3. Material: 8rass or bronze in accordance with ASME-816.15.
4. Protective Coating: None
5. Dimensions: In accordance with ASME-816.15, table titled "Dimensions of 90-deg Elbows (Reducing Sizes) - Class 125".
6. Thread: As specified in ASME-816.15.
7. Marking: In accordance with ASME-816.15.
8. Part or Identifying Number (PIN): The MS PIN consists of the MS number, the dash number, and the fitting
Identification letter(s). When left-hand threads are required, add the letter "L" to the PIN.
FIGURE 1. Reducing elbow fitting - Continued. PIN:
MS 14308 -3 x L
Thread designator:
8lank right hand thread, L- left hand thread
Outside head, inside head, face designator, see figure 1
Dash number on figure 1
8asic specification number
MS prefix
Examples:
MS14308 - 4 represents a 3/4 NPS x 1/2 NPS 90° reducing elbow.
MS14308 - 7L represents a 1-1/4 NPS x 1 NPS° reducing elbow left-hand threads.
2
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business