MIL-PRF-13789E
or recommended for additional information or as examples. While every effort has been made to
ensure the completeness of this list, document users are cautioned that they must meet all
specified requirement documents cited in sections 3 and 4 of this specification, whether or not
they are listed.
2.2 Non-Government publications. The following document(s) form a part of this document
to the extent specified herein. Unless otherwise specified, the issues of the documents that are
DoD adopted are those listed in the issue of the DoDISS cited in the solicitation. Unless
otherwise specified, the issues of documents not listed in the DoDISS are the issues of the
documents cited in the solicitation (see 6.2).
AMERICAN SOCIETY OF MECHANICAL ENGINEERS (ASME)
ASME B1.20.1
Pipe Threads, General Purpose (Inch) (DoD adopted)
ASME B16.1
Cast Iron Pipe Flanges and Flanged Fittings (DoD adopted)
ASME B16.5
Pipe Flanges and Flanged Fittings NPS 1/2 Through NPS 24
(DoD adopted)
ASME B16.21
Nonmetallic Flat Gaskets for Pipe Flanges (DoD adopted)
ASME B18.2.1
Square and Hex Bolts and Screws (Inch Series) (DoD adopted)
ASME B18.2.2
Square and Hex Nuts (Inch Series) (DoD adopted)
(Applications for copies should be addressed to the American Society of Mechanical
Engineers, 345 East 47th Street, NY, NY 10017.)
AMERICAN WATER WORKS ASSOCIATION (AWWA)
AWWA C606
Grooved and Shouldered Joints (DoD adopted)
(Application for copies should be addressed American Water Works Association, 6666 West
Quincy Avenue, Denver, Colorado 80235.)
2.3 Order of precedence. In the event of a conflict between the text of this document and the
references cited herein, the text of this document takes precedence. Nothing in this document,
however, supersedes applicable laws and regulations unless a specific exemption has been
obtained.
3. REQUIREMENTS
3.1 Description. The basket-type sediment strainer shall contain the items necessary to remove
foreign material from fuel and oil service lines.
3.2 First article. When specified (see 6.2), a sample shall be subjected to first article inspection
in accordance with 4.2.
3.3 Physical characteristics.
3.3.1 Strainer body. The strainer body configuration shall provide for fluid flow through the
strainer basket from the inside out.
3.3.1.1 Perforation diameter. Plate perforation diameter will be in accordance with table I.
2
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business