MIL-DTL-52525/41A
Hose
Flange
Hose
Tube
Part or Identifying
OD
OD
ID
Dash
size
Dash
Number (PIN))
inches (mm)
inches (mm)
inches (mm)
size no.
inches (mm)
size no.
M52525/41-08-08
.500 (12.70)
-08
.94 (23.88)
.500 (12.07)
.500 (12.70)
-08
M52525/41-12-12
.750 (19.05)
-12
1.26 (32.00)
.750 (19.05)
.750 (19.05)
-12
M52525/41-16-16
1.00 (25.40)
-16
1.51 (38.35)
1.00 (25.40)
1.00 (25.40)
-16
A
C
D
F
PIN
max
max
min
max
inches (cm)
inches (mm)
inches (mm)
inches (mm)
4.00 (101.6)
1.29 (32.77)
.35 (8.89)
.80 (20.32)
M52525/41-08-08
M52525/41-12-12
4.75 (120.65)
1.73 (43.94)
.60 (15.24)
1.10 (27.94)
M52525/41-16-16
5.60 (142.24)
2.02 (51.31)
.75 (19.05)
1.10 (27.94)
NOTES:
1. Dimensions are in inches.
2. Metric equivalents are given for information only.
FIGURE 1. Fitting, screw-on to 4-bolt split-flange, 45 bent tube -Continued.
REQUIREMENTS:
Fittings described herein are for use with hose in accordance with MIL-DTL-52471/9, type 100R12,
4-spiral-wrap reinforcement hose and hose assemblies in accordance with MIL-DTL-52471/10.
Fittings shall be as specified on figure 1 and in tables I and II.
If fittings are to be used on an oxygen hose, see MIL-DTL-52525.
Materials and finishes shall be in accordance with MIL-DTL-52525 and in table I. All finishes shall be
capable of withstanding 96 hours minimum of salt spray.
2