MIL-DTL-52525/36B
Hose
Flange
Hose
Tube
Part or Identifying
Size
OD
OD
ID
Size dash
Size dash
Number (PIN)
Inches
Inches (mm)
Inches (mm)
Inches (mm)
no.
no.
(mm)
M52525/36-12-12
.75 (19.05)
-12
1.26 (32.00)
.75 (19.05)
.75 (19.05)
-12
M52525/36-16-16
1.00 (25.40)
-16
1.51 (38.35)
1.00 (25.40)
.75 (19.05)
-16
D min
A max
B max
C max
PIN
inches
inches (cm)
inches (mm)
inches (mm)
(mm)
M52525/36-12-12
6.10 (15.49)
2.25 (57.15)
1.88 (47.75)
.60 (15.24)
M52525/36-16-16
6.86 (17.42)
2.50 (63.50)
2.31 (58.67)
.75 (19.05)
NOTES:
1. Dimensions are in inches.
2. Metric equivalents are given for information only.
3. These fittings are for use with MIL-DTL-52471/7 hose and MIL-DTL-52471/8 hose assemblies.
FIGURE 1. Fitting, screw-on to 4-bolt split-flange, 90 bent tube - Continued.
REQUIREMENTS:
The fittings described herein are for use with hose in accordance with MIL-DTL-52471/7, type 100RE,
4-spiral-wrap reinforcement hose and hose assemblies in accordance with MIL-DTL-52471/8.
Fittings shall be as specified on figure 1 and in tables I and II.
If fittings are to be used on an oxygen hose, see MIL-DTL-52525.
Materials and finishes shall be in accordance with MIL-DTL-52525 and in table I. All finishes shall be
capable of withstanding 96 hours minimum of salt spray.
2