MIL-DTL-52525/35B
Hose
Hose
Tube
Flange
A
Part or Identifying
ID
OD
OD
size
max
Number (PIN)
inches (mm)
inches (mm)
inches (mm)
inches (mm)
inches (cm)
M52525/35-12-12
.75 (19.05)
1.26 (32.00)
.75 (19.05)
.75 (19.05)
6.38 (16.20)
M52525/35-16-16
1.00 (25.40)
1.51 (38.35)
1.00 (25.40)
1.00 (25.40)
7.04 (17.88)
D
C
F
min
PIN
max
max
inches
inches (mm)
inches (mm)
(mm)
M52525/35-12-12
1.88 (47.75)
.60 (15.24)
1.18 (29.97)
M52525/35-16-16
2.31 (58.67)
.75 (19.05)
1.25 (31.75)
NOTES:
1. Dimensions are in inches.
2. Metric equivalents are given for information only.
FIGURE 1. Fitting, screw-on to 4-bolt split-flange, 45 bent tube -Continued.
REQUIREMENTS:
Fittings described herein are for use with hose in accordance with MIL-DTL-52471/7, type 100RE,
4-spiral-wrap reinforcement hose and hose assemblies in accordance with MIL-DTL-52471/8.
Fittings shall be as specified on figure 1 and in tables I and II.
If fittings are to be used on an oxygen hose, see MIL-DTL-52525.
Materials and finishes shall be in accordance with MIL-DTL-52525 and in table I. All finishes shall be
capable of withstanding 96 hours minimum of salt spray.
2