MIL-DTL-25531F
(Copies of these documents are available online at https://assist.dla.mil/quicksearch/ or from the
Standardization Document Order Desk, 700 Robbins Avenue, Building 4D, Philadelphia, PA
19111-5094.)
2.3 Non-Government publications. The following documents form a part of this document to
the extent specified herein. Unless otherwise specified, the issues of these documents are those
cited in the solicitation or contract.
AEROSPACE INDUSTRIES ASSOCIATION of AMERICA, INC. (AIA)
NASM20995
-
Wire, Safety or Lock
NASM33540
-
Safety Wiring and Cotter Pinning
NASM90725
-
Screw, Cap, Hexagon Head (Finished Hexagon Bolt),
Steel, Grade 5, Cadmium Plated, UNC-2A
(NA/NAS documents may be obtained online at www.aia-aerospace.org/ or from Aerospace
Industries Association 1000 Wilson Boulevard, Suite 1700 Arlington, VA 22209-3928.)
SAE INTERNATIONAL
SAE-AS9581
-
Washer, Key-Cres, AMS 5510. 90 DEG. Locking
(SAE documents may be obtained online at https://www.sae.org/ or from SAE World
Headquarters, 400 Commonwealth Drive, Warrendale, PA 15096-0001 USA.)
2.4 Order of Precedence. Unless otherwise noted herein or in the contract, in the event of a
conflict between the text of this document and the references cited herein, the text of this
document takes precedence. Nothing in this document, however, supersedes applicable laws and
regulations unless a specific exemption has been obtained.
3. REQUIREMENTS
3.1 Qualification. The coupling furnished under this specification shall be a product which has
been tested and has passed the qualification tests specified herein, and has been listed on or
approved for listing on the applicable Qualified Products List.
3.2 Commercial parts. Commercial parts having suitable properties may be used where, on the
date of invitation for bids, there are no suitable standard parts. In any case, commercial utility
parts, such as screws, bolts, nuts, and cotter pins, having suitable properties may be used
provided:
a. They can be replaced by the standard parts (MS or AN) without alteration.
b. The corresponding standard part numbers are referenced in the parts list and, if
practical, on the contractor's drawings.
3
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business