AN912 Rev 10
Weight max lbs (kg)
K
Dash
Dia.
Copper
Steel,
number
Al alloy
Ti alloy
inches (mm)
alloy
CRES
+.000
1
.327 (8.31)
.033 (0.015)
.011 (0.005)
.033 (0.015)
.018 (0.008)
-.016 (0.41)
+.000
2
.423 (10.74)
.048 (0.022)
.016 (0.007)
.048 (0.022)
.026 (0.012)
-.019 (0.48)
+.000
3
.327 (8.31)
.063 (0.029)
.021 (0.010)
.063 (0.029)
.035 (0.016)
-.016 (0.41)
+000
4
.557 (14.15)
.090 (0.041)
.030 (0.014)
.090 (0.041)
.050 (0.023)
-.028 (0.71)
+.000
5
.423 (10.74)
.123 (0.056)
.041 (0.019)
.123 (0.056)
.068 (0.031)
-.019 (0.48)
+.000
6
.327 (8.31)
.144 (0.065)
.048 (0.022)
.144 (0.065)
.079 (0.036)
-.016 (0.41)
+.000
7
.688 (17.48)
.144 (0.065)
.048 (0.022)
.144 (0.065)
.079 (0.036)
-.034 (0.86)
+.000
8
.557 (14.15)
.195 (0.088)
.065 (0.029)
.195 (0.088)
.107 (0.048)
-.028 (0.71)
+.000
9
.423 (10.74)
.288 (0.131)
.076 (0.034)
.228 (0.103)
.126 (0.057)
-.019 (0.48)
+.000
10
.897 (22.78)
.246 (0.112)
.082 (0.037)
.246 (0.112)
.136 (0.062)
-.040 (1.02)
+.000
11
.688 (17.48)
.339 (0.154)
.113 (0.051)
.338 (0.153)
.187 (0.085)
-.034 (0.86)
+.000
12
.557 (14.15)
.402 (0.182)
.134 (0.061)
.401 (0.182)
.221 (0.103)
-.028 (0.71)
+.000
13
.897 (22.78)
.576 (0.261)
.192 (0.087)
.575 (0.261)
.317 (0.144)
-.040 (1.02)
NOTES:
1. Dimensions are in inches.
2. Metric equivalents are given for information only.
3. Break sharp edges .and remove all hanging burrs and slivers
4. Machined surfaces shall be finished to 125µin Ra, forged surfaces shall be 250µin Ra, unless
otherwise specified on the figures. Surface finish shall be in accordance with ASME B46.1.
5. For design features purposes, this standard takes precedence over documents referenced herein.
6. Referenced documents shall be of the issue in effect on date of invitation for bid.
FIGURE 1. Bushing dimensions and configurations - Continued.
REQUIREMENTS:
Dimensions and configuration shall be in accordance with figure 1.
Materials and finishes shall be in accordance with SAE-AS4842, see table I for material code.
3
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business