A-A-52506 Clamps, HoseThis CID covers metal hose clamps that are used for holding flexible ducts, or hose on to a male fitting. These hose clamps are generally used on coolant, fuel, oil, vacuum, and emission systems. The selection of type and size of hose clamps for a specific application involves factors, such as torque, vibration, and pressure requirements (see 7.4).

Pages 1 - 2 - 3 - 4 - 5 - 6 - 7

TABLE II. Cross reference data.

SAE J1508/CID A-A-52506 Hose clamp type(s)	Superseded WW-C-440B Hose clamp type(s)
A, AHH & SLA	A
B	B
C	C
D	D
E, CTB, CTW	E
F, FE, FEO, HD, I, M, MX, SLF, SLHD & T	F, MS35842E
NOT APPLICABLE (N/A)	G
N/A	H
TB, SLTB	N/A

7.4 Clamp types. The clamp types shown in figure 2 are for illustration purposes only. Refer to SAE J1508 for a more accurate depiction of the hose clamp types.

7.5 Regulatory requirements. The offeror/contractor is encouraged to use recovered materials in accordance with Public Law 94-580, as amended, to the maximum extent possible.

7.6 Part Identification Number (PIN). The following part identification numbering procedure is for government purposes and does not constitute a requirement for the contractor. The PIN to be used for a hose clamp using this CID, and associated federal specification sheets will be indicated in each federal specification sheet.

The PIN used for a hose clamp only using this CID is generated as follows: Hose clamps conforming to this CID are interchangeable with hose clamps conforming to SAE J1508.

AA52506 -XXXX � XXX

AA52506 = CID Number

XXXX = Indicates Hose Clamp type per SAE J1508

(A, B, C, D, E, F, G, H, TB, SLTB)

XXX = Indicates Hose Clamp size per SAE J1508

Example: AA52506F296 = An �F� type hose clamp that is SAE J1508 size 296.