MIL-DTL-85061C
1.2.2 Size. The size of couplings in dash numbers are specified in table II.
1.2.3 Material. The basic material of the coupling is designated by the code letters as
specified in table I.
2. APPLICABLE DOCUMENTS
2.1 General. The documents listed in this section are specified in sections 3 and 4 of this
specification. This section does not include documents cited in other sections of this
specification or recommended for additional information or as examples. While every effort has
been made to ensure the completeness of this list, document users are cautioned that they must
meet all specified requirements of documents cited in sections 3 and 4 of this specification,
whether or not they are listed.
2.2 Government documents.
2.2.1 Specifications, standards, and handbooks. The following specifications, standards,
and handbook form a part of this document to the extent specified herein. Unless otherwise
specified, the issues of these documents are those cited in the solicitation or contract.
FEDERAL STANDARD
FED-STD-H28/2
-
Screw-Thread Standards for Federal Services Section 2
Unified Inch Screw Threads- UN and UNR Thread Forms
DEPARTMENT OF DEFENSE SPECIFICATIONS
MIL-DTL-5624
-
Turbine Fuel, Aviation, Grades JP-4 and JP-5
MIL-PRF-7024
-
Calibrating Fluids, Aircraft Fuel System Components
MIL-A-8625
-
Anodic Coatings for Aluminum and Aluminum Alloys
MIL-DTL-83133
-
Turbine Fuel, Aviation, Kerosene Type, JP-8 (NATO F-34)
and NATO F-35 and JP-8+100 (NATO F-37)
DEPARTMENT OF DEFENSE STANDARDS
MIL-STD-129
-
Military Marking for Shipment and Storage
MIL-STD-130
-
Identification Marking of U.S. Military Property
MIL-STD-810
-
Environmental Engineering Considerations and
Laboratory Tests
MIL-STD-889
-
Dissimilar Metals
2
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business