INCH-POUND MS27382C
1 May 2013 SUPERSEDING MS27382B
25 September 2003
DETAIL SPECIFICATION SHEET
ADAPTER ASSEMBLY, FLARELESS, 45° ELBOW, TUBE TO HOSE - WITH SWIVEL NUT
This specification sheet is approved for use by all Departments and Agencies of the Department of Defense.
The requirements for acquiring the product described herein shall consist of this specification sheet and MIL-DTL-27272.
NOTES:
1. Dimension A, see table II, is measured between the hose end of the socket and the free end of the radius MS8000 series seal insert at its centerline when the socket is assembled on the nipple subassembly.
2. Socket may be hex or 2-flat sides.
3. If required lockwire holes to be drilled on this side of subassembly in accordance with
SAE-AS1043.
FIGURE 1. Adapter assembly illustration.
AMSC N/A FSC 4730
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business