INCH-POUND
MIL-DTL-8783D
3 February 2009
SUPERSEDING
MIL-DTL-8783C
30 July 1999
DETAIL SPECIFICATION
CLAMP, HOSE, FLAT BAND 500F,
GENERAL SPECIFICATION FOR
This specification is approved for use by all Departments and
Agencies of the Department of Defense.
1. SCOPE
1.1 Scope. This specification covers flat band, T-bolt latch clamps and flat band, quick-release latch
clamps used in various aircraft installations of duct, hose and flex tubing.
1.2 Part or Identifying Number (PIN). The PIN consists of the letters MS, numerical designator, a
dash, and size designator.
21920
-30
MS
Size designator
Numerical designator
MS prefix
2. APPLICABLE DOCUMENTS
specification. This section does not include documents cited in other sections of this specification or
recommended for additional information or as examples. While every effort has been made to ensure the
completeness of this list, document users are cautioned that they must meet all specified requirements
2.2 Government documents.
2.2.1 Specifications, standards, and handbooks. The following specifications, standards, and
handbooks form a part of this document to the extent specified herein. Unless otherwise specified, the
issues of these documents are those cited in the solicitation or contract.
Comments, suggestions, or questions on this document should be addressed to: Defense Supply Center,
Columbus, Attn: DSCC-VAI, P.O. Box 3990, Columbus, OH 43218-3990, or emailed to FluidFlow@dla.mil.
Since contact information can change, you may want to verify the currency of this address information
using the ASSIST Online database at https://assist.daps.dla.mil.
AMSC N/A
FSC 4730
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business